A级人体片

<td id="n5hh0"></td>

      1. drying machine
        Welcome to Sunco Machinery  |  Site Map  |  Contact us

        PRODUCT CENTER

        You are here: Home > products >> Rotary Drying Machine
        Slag Dryer, Raw Slag Dryer, Slag Rotary Dryer, Slag Dryer Machine, Slag Drying Machine

        Slag Dryer

        Slag dryer also named slag drying machine. Raw Slag dryer is ideal drying machine for the big moisture and high density materials such as blast furnace slag, limestone, clay, sand, etc. The dried slag can be used into cement industry.
        service hotline
        Details

        Slag Dryer Application :

        ◆ Slag dryer is developed from rotary drum dryer. Raw Slag Dryer Machine is widely used in building materials, metallurgy, mineral processing, chemical, cement and other industries, mainly for the raw blast furnace slag, limestone, clay, sand, quartz sand, granulating slag and other wet materials with high intensity. After being dried by the slag drier, the dried slag can be used into the cement industry

        Wet Slag                                                                           Dried Slag

        Slag Dryer, Slag Rotary Dryer, Slag Dryer Machine, Slag Drying Machine Slag Dryer, Slag Rotary Dryer, Slag Dryer Machine, Slag Drying Machine

        ◆ Slag drying production line mainly consists of the rotating cylinder, high-speed breakup equipment, lifting plate, self-cleaning device, gear transimission device, hot air furnace, reducer machine, supporting device, sealing device, air duct system, dust cyclone separator,etc.

        Slag Dryer, Slag Rotary Dryer, Slag Dryer Machine, Slag Drying Machine

        Slag Dryer Working Principle:

        ◆ Slag is relatively sticky. During the drying process, the wet slag will be transported  into the feed hopper by belt conveyor. Feed hopper is directly connected to the drying cylinder, and the wet slag will goes into the drying drum by the feed hopper, begin to contact with the hot gas stream inside the drying drum, thereby starting the whole slag drying process.

        ◆ The entire slag drying process can be divided into three parts. 

        1.The wet raw slag contact with the hot air inside the drying drum, and the high temperature hot air heat the wet slag, and the moisture is evaporated;

        2. There are many lifting boards which are welded on the inner wall of the rotating drying drum, and it not onel make the slag move forward, but also makes the wet slag up and down, during this process, the wet slag contact with the hot air sufficiently, and enhance the drying speed of slag; 

        3. There are special cleaning device inside the drying drum. During the drying process, it gets rid of the caking and adhesive material on the inner wall of the drying drum, thus prevent clogging.

        Slag Dryer, Slag Rotary Dryer, Slag Dryer Machine, Slag Drying Machine

        Slag Dryer Advantages:

         Strong drying ability: Because the material is highly dispersed in the hot gas stream, the entire surface of the slag particles are the effective drying area.
         Short drying time.
         Simple and Reasonable structure, Small floor area needed, Easy construction and maintenance.
         Large capacity, high thermal efficiency. When dried the free water, the thermal efficiency of up to 75%.
         Achieve "zero thrust", greatly reducing the wear on the roller block, and the cylinder runs smoothly and reliably. 
         The roller and rolling ring are always in linear contact, thereby greatly reducing the wear and power loss.

        Partial Specification of Slag Dryer :

        Model

        Processing 

        Capacity

         Input 

        Moisture

        Output 

        Moisture

        Main Motor 

        for Sand Dryer

        Coal 

        Calorific Value

        Feedinlet

         Temperature

        ?1.5X14M

        10-12

        20±3%

        <10%

        15

        >5500 KCAL/KG

        700±50

        ?1.8X14M

        15-18

        20±3%

        <10%

        18.5

        >5500 KCAL/KG

        700±50

        ?2.0X16M

        20-25

        20±3%

        <10%

        18.5

        >5500 KCAL/KG

        700±50

        ?2.2X18M

        25-30

        20±3%

        <10%

        22

        >5500 KCAL/KG

        700±50

        Notice: Any change of Slag Dryer technical data shall not be advised additionally.

        If you are interested in our Slag Dryer Machine, please refer to: 

        ◆ Email: suncomachinery@hotmail.com 

        ◆ Mobile: +86 15838214261 

        ◆ Skype: cliff-qin

        Video: https://www.youtube.com/watch?v=yGzcIJ0aFL0

        Inquiry
        Note: Please feel free to give your inquiry in the form below. We will reply you with details within 24 hours!
        Topic: *
        Company:
        Name: *
        Tel: *
        E-mail: *
        Message:
         
        A级人体片

        <td id="n5hh0"></td>